CMS B-GT5 Performance Camshaft (High-Torque Fast Road Profile)
Precision In-House Engineering for the BMC B-Series Engine
At Classic Machine Shop CMS, we do not believe in compromise. Drawing from decades of British tuning heritage and modern computer-designed lobe geometry, we have adapted one of the most celebrated high-torque road profiles in A-Series motorsport—the legendary SW5 geometry—specifically for the BMC B-Series engine.
Most traditional fast-road camshafts sacrifice bottom-end flexibility for top-end power you rarely use on the street. The CMS B-GT5 turns that formula on its head. Engineered specifically for real-world road driving below 5,500 RPM, it uses fast-opening ramps and generous lift over a sensible duration to deliver massive low-down and mid-range torque.
Whether you are pulling out of tight corners in an MGB, cruising effortlessly in an MGA, or hauling extra weight in a classic saloon, this profile delivers crisp throttle response, a smooth, civilised idle, and strong pull from as low as 1,800 RPM.
Technical Specifications:
Technical Specifications:
CMS Profile Designation: CMS B-GT5 (CMS-B-GT5)
Profile Geometry: Custom B-Series adaptation of the proven SW5 high-torque road geometry
Target Application: High-Torque Fast Road / Grand Touring (1500cc, 1622cc, and 1800cc B-Series engines)
Effective Power Band: 1,500 – 5,800 RPM
Max Cam Lobe Lift: 0.287" (7.28 mm) Intake / 0.278" (7.05 mm) Exhaust
Estimated Valve Lift (Standard B-Series 1.42:1 Rockers): 0.407" (10.34 mm) Intake / 0.394" (10.02 mm) Exhaust
Duration (@ 0.050" / 1.27 mm): 216° Intake / 212° Exhaust
Timing Figures (@ 0.050"): 0.35° BTDC – 35.75° ABDC Intake / 32.65° BBDC – -0.53° ATDC Exhaust
Lobe Centerline: 107.0° ATDC Intake / 106.5° BTDC Exhaust
Checking Lash: 0.012" (0.30 mm)
The CMS Core Exchange Service
This profile is precision-ground onto an original, inspected factory B-Series core. To purchase this camshaft, you can either:
First Option: Ship your original, clean A-Series camshaft to our workshop. Once it passes our strict structural integrity and gear wear inspection, we will dispatch your new CMS performance cam.
Second Option: Pay an upfront core surcharge at checkout. We will ship your CMS camshaft immediately, and refund the deposit in full once your usable exchange core arrives at our shop and passes inspection.
Installation & Break-In Requirements
To ensure the longevity of your flat-tappet A-Series valvetrain, CMS requires the following installation steps. Failure to follow these steps will void the product warranty:
Mandatory New Followers: Never install a new or reground camshaft with used lifters. You must use brand-new, high-quality flat-tappet followers. Check Valvetrain Geometry: Because this is a high-velocity regrind with a slightly reduced base circle, you must check rocker arm geometry. Ensure adjustment screws have proper thread engagement. Rocker pedestal shims may be required to restore a perfect 90-degree alignment. Break-In Procedure: Coat all lobes and follower faces heavily with high-zinc ZDDP assembly paste. Upon initial startup, do not idle the engine. Run the engine immediately at 2000 to 2500 RPM for 20 minutes to work-harden the new lobe surfaces.
Trademark Disclaimer
Classic Machine Shop CMS is an independent manufacturer of precision-ground engine components. Any reference to original manufacturer names, profile designations, or original part numbers is strictly for informational and comparative purposes to describe the physical geometric dimensions of the lobe profile. Classic Machine Shop has no official affiliation with these trademark holders.












